How to Apply Your Screen Protector
Follow these simple steps for a perfect, bubble-free installation
1
Remove all accessories
Case, screen protector, film, etc.
2
Clean the screen & remove dust
Use the alcohol wipe and dry it with the microfiber cloth. Use the dust-removal sticker across the entire screen. Repeat several times, especially around the edges, until no dust remains.
3
Place phone into installation tray
Ensure that the phone is on a flat surface, like a table. Place the installation tray on the phone. Make sure the top part of the applicator is placed at the top of the device.
4
Peel
The peel tab labelled #1 is the top of the glass. Use this tab to peel off the layer of protective film onthe back of the screen protector. Be careful not to touch the newly expose adhesive surface on the screen protector when peeling off the protective film.
5
Apply
Make sure to face the adhesive side of the glass toward the phone screen, then align the edge of the screen protector with the top edge of the installation tray and apply the screen protector. Press down on the center of the glass with both index fingers. Then slide both fingers in opposite directions across the screen protector.
6
Final touch
Remove the phone from the tray. If air bubbles are present under the glass, use a plastic card or microfiber cloth to push them out by applying pressure from behind the bubble to the edge of the glass.
Pro Tips for Perfect Installation
- Work in a dust-free environment like a bathroom after running hot water
- Wash your hands before starting to avoid fingerprints
- Take your time - rushing leads to mistakes
- Small bubbles often disappear within 24-48 hours